Chains + co.

Chains + co.

Your chain is in charge of your momentum and should be checked regularly. Replace it if necessary. A chain breaking, while you are at full throttle, often leads to a knee to the stem or an unintended front flip over the bars. Chain tension should neither be to loose, nor too strong. If you can move the installed chain one centimeter up and down, you should be good. Buying a new chain always means you have to cut it. Therefore we strongly suggest a chain breaker from our tools category. With a so called half-link you can perfectly adjust the chain length to your frame and sprocket. There are also chains completely made from half-links. These are way stronger than regular chains, but are also a little bit more expensive. If your chain keeps coming loose, you need chain tensioners. Integrated chain tensioners only work on special frames. Please choose from one of the categories below:

 

Chain Tensioners Fit integrated
M4 x 20 mm x 2 mm inner hex CrMo bolt, nickle plated, includes two bolts and one 2 mm Hex Key tool
2,95 EUR
2,95 EUR per Set
incl. 19% tax excl. Shipping costs
Half-Link Contec
individual Half-Link for BMX chains, 1/2" x 1/8", image similar-looking
2,95 EUR
2,95 EUR per Stk.
incl. 19% tax excl. Shipping costs
Half link KMC

For 1/8" or 3/32" chains 

2,95 EUR
2,95 EUR per Stk.
incl. 19% tax excl. Shipping costs
Chainlock KMC 1/2" x 3/32"

Chain lock for 1/2" x 3/32" chains

3,95 EUR
3,95 EUR per Paar
incl. 19% tax excl. Shipping costs
Chainlock KMC 1/2" x 1/8"

Chain lock for wide chains 1/2" x 1/8"

3,95 EUR
3,95 EUR per Paar
incl. 19% tax excl. Shipping costs
Show 1 to 24 (from a total of 41 products)